Start a conversation

NO CALIB error is displayed

When this error occurs you need to calibrate the scanner.

To do so:

  • Place the scanner on a clean, white A3 sheet of paper on a flat surface in ambient light.
  • Power on the scanner.
  • While pressing and holding the Up/DPI and the JPG/PDF/Multi-PDF/Down buttons simultaneously, press the Scan/Power/Enter button for 3 seconds. Release the Scan/Power/Enter button, and then the UP/DPI and the JPG/PDF/Multi-PDF/Down buttons.
  • 1111 appears on the display.
  • Do not move the scanner and wait for about 1 minute until 2222 is displayed.
  • When 2222 appears on the display, press the Scan/Power/Enter button.
  • Slide the scanner slowly up and down over the paper until 3333 appears on the display.
  • Continue sliding the scanner over the paper until the scanner is powered off.
  • The calibration has been successfully performed.
Choose files or drag and drop files
Was this article helpful?
Yes
No
  1. David Gillard

  2. Posted
  3. Updated
Please sign in to comment
-->

Contact us

If one of the above article didn't help you , if you are looking to contact us for business enquiries or if you want to return a product, do no hesitate to contact us! One of our agent will take care of your request as soon as possible.