Start a conversation

Anywhere 3 wi-fi

Cordless portable scanner

  • My PC doesn't recognise the scanner as an imaging device

    The scanner is designed to be used disconnected from the computer until it is time to upload the images stored in memory. That could be either the internal memory, either a SD card or a USB flash driv...

  • Connecting to the Scanner via Wifi

    Enable the Wifi Function 1. Press for 3 seconds to power on the scanner. 2. Press for 3 seconds.Starting appears on-screen. 3. Wait 30-40 seconds for the Wifi to initialize.Ready appears on-screen onc...

  • Walkthrough IRIScan Anywhere 3 Wi-Fi PC

    First know that you will not be able to start a scan with the supplied Readiris/Cardiris or any other software because that is not how the product has been designed to work. It is what makes the scann...

  • Walkthrough IRIScan Anywhere 3 Wi-Fi Mac

    First know that you will not be able to start a scan with the supplied Readiris/Cardiris or any other software because that is not how the product has been designed to work. It is what makes the scann...

  • How to calibrate the scanner ?

    To calibrate your scanner, you need the calibration sheet provided inside the package. If you don't have it anymore, you can download the PDF attached to this article. Calibrating the Scanner Note: If...

  • How to switch to color/mono mode

    1.Switch on power on the scanner and click on the settings button 2.Click on ↓ to go to menu color> Enter 3.Change to Mono > Enter > Back. The document iconchanges to black and white...

  • What is the purpose of the black pad delivered with the scanner?

    The black pad is used to clean the Image Sensor. Important: before you clean the Image Sensor make sure the scanner's outer casing is clean.  Power off the scanner and disconnect it from your computer...