Start a conversation

IRIScan Book 3 / Book 3 Executive

Book scanner

Knowledgebase

  • Where can I find my activation code for Readiris 14?

    Depending on the version of IRIScan Book Executive 3 you have, the activation code/serial number can be found : 1. On the illustrated Quick Start Sheet provided with the scanner (if no CD is provided ...

  • How do I calibrate my IRIScan Book 3?

    This procedure must only to be used if the scanner is not working properly. It must not be used before first use. Clean the CIS glass at the bottom using a clean cloth. Power on the scanner. The micro...

  • Walkthrough IRIScan Book 3 Executive PC

    IRIScan Book 3 Executive Windows To Start Slide the top cover with the words IRIScan Book to the right 1/4 inch and then lift the cover off to reveal the battery compartment. Insert the batteries on t...

  • Walkthrough IRIScan Book 3 PC

    IRIScan Book 3 Windows Insert the 3 AAA batteries into the scanner. The cover is on the top where the USB plug is located. There is an Open ► embossed into the cover. To access the battery compartment...

  • Walkthrough IRIScan Book 3 Executive Mac

    To Start Slide the top cover with the words IRIScan Book to the right 1/4 inch and then lift the cover off to reveal the battery compartment. Insert the batteries on the top row with the positive pole...

  • Walkthrough IRIScan Book 3 Mac

    To Start Insert the 3 AAA batteries into the scanner. The cover is on the top where the USB plug is located. There is an Open ► embossed into the cover. To access the battery compartment  place your t...

  • How do I calibrate my IRISCan Book 3 (Executive)?

    This procedure should only to be used if the scanner is not working properly, not before first use : Clean the CIS glass on the bottom using a clean cloth. Power on the scanner. It is not required to ...

  • My scanner isn’t recognized by Readiris

    The scanner has been designed to be used disconnected from a computer, mainly to scan books and magazines. Indeed, it isn’t possible to run the scanner using the software since there’s no TWAIN driver...

  • My scanner produces blurry images

    Your scanner probably needs to be calibrated. In order to calibrate it, follow the procedure that is explained on the “How do I calibrate my IRIScan Book 3” article. Also, the lens of the scanner migh...

  • How do I change the password of the Wi-Fi connection

    1. Press the Scan button for 2 seconds to power on the scanner. 2. Switch the Wi-Fi button to the middle position. The Wi-Fi led lights up. 3. Turn on the Wi-Fi connection on your computer, and select...